Характеристики и описание
electrical ratings | |
|---|---|
| Voltage supply | 5 VDC ±5 % |
| Consumption typ. | 100 mA (5 VDC, w/o load) |
| Sinewave cycles per revolution | 1000 … 5000 |
| Reference signal | Zero pulse, width 90° |
| Sensing method | Optical |
| Output frequency | ≤160 kHz |
| Output signals | A 90° B, N + inverted |
| Output stages | SinCos 1 Vpp |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-3 |
| Approval | UL approval / E217823 |
mechanical design | |
| Size (flange) | ø58 mm |
| Shaft type | ø6 mm solid shaft (synchro flange) |
| Admitted shaft load | ø6 mm solid shaft (synchro flange)≤10 N axial ≤20 N radial |
| Flange | Synchro flange |
| Protection DIN EN 60529 | Synchro flangeIP 65 IP 42 |
| Operating speed | Synchro flangeIP 65 IP 42≤12000 rpm (IP 42) ≤6000 rpm (IP 65) |
| Operating torque typ. | Synchro flangeIP 65 IP 42≤12000 rpm (IP 42) ≤6000 rpm (IP 65)0,0023 Nm (IP 42) 0,026 Nm (IP 65) |
| Material | Synchro flangeIP 65 IP 42≤12000 rpm (IP 42) ≤6000 rpm (IP 65)0,0023 Nm (IP 42) 0,026 Nm (IP 65)Housing: steel Housing: steel (connection -A) Flange: aluminium |
| Operating temperature | -20...+85 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | 95 % non-condensingDIN EN 60068-2-6 Vibration 10 g, 10-200 Hz DIN EN 60068-2-27 Shock 50 g, 11 ms |
| Connection | 95 % non-condensingDIN EN 60068-2-6 Vibration 10 g, 10-200 Hz DIN EN 60068-2-27 Shock 50 g, 11 msConnector M23, 12-pin Cable 2 m |
| Weight approx. | 300 g |
electrical ratings
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
Доставка
Оплата и гарантии